Paving company in Ashland City, TN
Ashland City's river bluffs and wooded hills mean sloped driveways, culverts and drainage work.
- Downtown Ashland City
- Cumberland River area
- Highway 12 corridor
Pavement that handles the slope, Ashland City.
Slopes and water decide how hillside pavement ages: runoff cuts into thin edges, steep grades demand traction and heavy loads like trash trucks stress the base. We use a thicker base where slope or load demands it, set crowns and culverts to shed water, add shoulders to protect edges and choose mixes that grip. Good design keeps a steep driveway from washing out.
Ashland City is about 18 miles from downtown Nashville, in Cheatham County.
Slope-ready sections
Thicker base and heavier asphalt where needed.
Water control
Culverts, ditches and crowns.
Protected edges
Shoulders that stop breakup.
What Ashland City owners ask us for.
DrivewaysLong and Rural DrivewaysA quarter mile? We have paved it.
DrivewaysDriveway Aprons and CulvertsThe small spot that decides everything.
Site Prep & DrainageDrainage and Catch BasinsWater is the real enemy.
DrivewaysNew Asphalt DrivewaysBlack, smooth and built to last.
Site Prep & DrainageErosion Control and Site StabilizationResponsible sites, fewer headaches.
Roads & Large ProjectsPrivate Road PavingSmooth miles, built to carry real loads.Size a paving job in Ashland City.
Enter the length and width, choose a thickness and base and see tons, truck loads and a planning price. Send the numbers with your estimate request.
Size the job
Asphalt weighs roughly 145 pounds per cubic foot once compacted, so each inch over 1,000 square feet is about 6 tons. Thickness and base are set by your soil and traffic.
- Asphalt needed
- Stone base needed
- Truck loads of asphalt
- Time on site
A planning estimate from commonly published averages, not a quote. Real prices depend on access, soil, drainage, thickness, base work and the distance to the plant. The 25-year chart is an illustration with the assumptions shown.
Saved. It will travel with your estimate request below.
Ashland City owners ask
Can you pave a steep driveway?
Yes. We design the base, mix and drainage for the slope, and add culverts, shoulders and traction-minded finishing so the surface stays put in heavy rain.
Do you work in Ashland City and the towns around it?
Yes. We work in Ashland City and nearby communities including Kingston Springs, Bellevue, Dickson, Clarksville. Call or text 615-209-7643 if your address is just outside the list.
How much does asphalt paving cost in Ashland City?
Commonly published planning ranges run from roughly $4 to $9 per square foot for a new asphalt driveway and about $3 to $8 for commercial parking lots, depending on base work, thickness, drainage and access. A free site visit gives you a written, itemized price.
How do I get started?
Fill in the form on this page or call 615-209-7643. We schedule a visit, measure, check drainage and the existing pavement and send a written estimate.
Also paving in the neighborhood.
Thinking about paving in Ashland City?
A free site visit and a written price. We call back, usually the same day.