Mill the worn surface. Overlay it new.
Grinding off the top layer of worn asphalt and paving a fresh surface, keeping grades and curb heights correct and removing the damage in one step.
- Depth: Typically 1 to 3 in. milled
- Grade: Kept the same as the existing
- Recycling: Millings often reused
What it is, and why it matters.
Milling removes the top inch or two of worn asphalt with a grinding machine, leaving a rough, even surface to pave over. It keeps the finished grade where it was, so curbs, drains and doorways do not end up too low, and it removes the cracked, oxidized material that would otherwise reflect through a new layer.
In Nashville and across Tennessee, milling and overlay is the standard way to renew roads, large lots and driveways when the base is good. We mill to the right depth, repair deeper failures, tack the surface and place new asphalt. The milled material can often be recycled, which saves cost and keeps it out of the landfill.
Four things done right.
Keeps heights correct
Curbs, drains and doors stay accessible.
Removes damaged layer
Cracks do not reflect through.
Recycles material
Lower cost and less waste.
Fast
Often done in a day or two.
From first visit to milling and overlay.
- 01
Evaluate the surface
We check thickness and base condition.
- 02
Mill
Top layer ground to the target depth.
- 03
Repair and tack
Deeper failures fixed; tack coat applied.
- 04
Overlay
New asphalt laid and rolled.
Milling and Overlay across Tennessee.
We do this work in 56 cities, from downtown Nashville to Memphis, Knoxville, Chattanooga and the Tri-Cities.
Milling and Overlay: common questions
What is the difference between milling and overlay and a plain overlay?
A plain overlay adds height. Milling first removes the damaged top layer so the new surface keeps the existing grade, which matters at curbs, gutters and doors.
Can milled asphalt be reused?
Yes. Recycled asphalt millings are commonly used in new mixes and as base or driveway material, depending on the project.
How do I get a price for milling and overlay?
Fill in the form or call 615-209-7643. We schedule a free site visit, measure, check drainage and the existing pavement and send a written proposal that lists exactly what is included.
Ready to talk about milling and overlay?
A free site visit and a written price. A real person calls back, usually the same day.